solder paste warm up machine

solder paste reheating machine

Part number :

Description :Solder paste is usually refrigerated in a refrigerator, and the refrigerating temperature is preferably 5-10 degrees. Therefore, when the solder paste is taken out from the refrigerator, the temperature is much lower than the room temperature. If the bottle cap is opened without returning the temperature, the moisture in the air is easily condensed and adhered to the solder paste. Moisture is rapidly vaporized due to strong heat, causing “explosive tin” phenomenon, producing tin beads, and even damaging components. Now we developed an solder paste reheating machine, it can reheat 4 tins, 8 tins, 12 tins solder paster once. You can set the time to reheat the solder paste, so it can shorten the temperature recovery time, quick and safe.

Spec:

Power supply AC110V/220V, 50/60Hz
Air pressure 0.4Mpa
Working cans 4 tins, 8 tins, 12 tins
Machine dimension 4 tins : L500*W300*H230(mm), 8 tins : L500*W520*H320(mm), 12 tins : L700*W520*H320(mm)